Aerohot Steam tables offer both
efficiency and economy, and Electric models are available with exposed or sealed wells, and can be ordered in 2, 3, 4 or 5 well configurations. The sealed wells are made of stainless steel and the 750 watt heating elements are located under the liner pan for both wet or dry operation. Each well has an individual drain valve and infinite switch. A 6' cord and plug are supplied. Exposed element units have die-formed, 8" deep galvanized liners in each compartment for dry operation only. A stainless liner is available as an option can operate wet with optional spillage pans. Gas models are made for either natural or propane. The openings are die-formed with 8" galvanized liners. Spillage pans are to be used when water is needed for holding foods. Each compartment burner is rated at 3500 BTU per hour per well. There is an adjustable gas valve with pilot light controls for each burner. A galvanized steel radiation plate is provided in each compartment, as well as one gas pressure regulator in each unit.
The Aerohot Gas Wet Bath has an 8" deep stainless liner, with a 15,000 BTU single burner mounted 3" below the liner of 2 and 3 section units, while our 4 and 5 section units have a burner rated by 27,500 BTU which is mounted 5" below the liner. There is a hi-med-low adjustable gas valve to control the burner, and a safety pilot is provided. One gas pressure regulator in each unit. To complete the Steam tables line there is an ice-cooled cold pan and a solid top unit. The bodies are stainless steel, as are the legs and under shelves. There are stationary and portable units. Portable units have 5" NSF listed non-marking, swivel-type caster, two with locks. Stationary and portable ice pans in 30-3/8", 44-3/8", 58-3/8" and 72-3/8" lengths. Solid tops are available in 44-3/8", 58-3/8", and 72-3/8" lengths. Options for Aerohot Steam tables include: Buffet, serving, dish tray and display shelves; tray slides and stainless steel or wood carving boards .
The original steamtable, Thurmaduke is
constructed of only the finest material. Thurmaduke Steamtables have 16 gauge, 300 Series stainless steel tops with
die-stamped openings. The units can be ordered with 2-, 3-, 4-, 5-, or
6-wells The bodies of Thurmaduke Steamtables are constructed of heavy gauge 300 Series stainless or paint-grip steel, with choice of standard powder coat paint colors. End panels are die-stamped with square corners with the side opposite the operator fully enclosed. Thurmaduke units have a bottom shelf of heavy gauge steel, same as body panels, with edges flanged down at the back and ends. Thurmaduke units come standard on 6" stainless steel legs, which are adjustable to 7-1/4". Portable Thurmaduke Steamtables are available in electric only, and come with a 10" wide, heavy gauge stainless steel carving surface which is mounted on stainless steel drop-type brackets on the operator's side. Matching steel sliding doors enclose operator's side. Matching steel sliding doors enclose operator's side. A 6' heavy duty cord and plug is permanently attached to the right side of the unit on the inside. An 8-1/2" pusher bar is attached to the end panel on operator's right end. There is a heavy-duty polyvinyl bumper that extends 2-1/2" from the body and shall encircle the base of the unit. The bumper is mounted on a 14 gauge stainless steel channel frame. The portable Thurmaduke is mounted on 5" diameter casters, two (2) with locks. Sneeze Guards can be added
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
